DPR connector

Have stuff to sell or give away? Looking for something you need? This is where you can let others know.
Post Reply
steveaca
Posts: 1532
Joined: Mon Feb 08, 2010 1:12 pm

DPR connector

Post by steveaca »

Would anyone have one or two Scalextric DPR connectors (the bit that plugs into the DPR chip and from which wires run to the motor and guide blade) ?
User avatar
gordon
Site Admin
Posts: 2967
Joined: Thu Feb 04, 2010 2:34 pm
Location: Trinidad & Tobago
Contact:

Re: DPR connector

Post by gordon »

Can they be from blown chips Steve?
steveaca
Posts: 1532
Joined: Mon Feb 08, 2010 1:12 pm

Re: DPR connector

Post by steveaca »

Hi Gordon, I guess they could as I don't think a chip being blown wold have any effect on the connector.
User avatar
gordon
Site Admin
Posts: 2967
Joined: Thu Feb 04, 2010 2:34 pm
Location: Trinidad & Tobago
Contact:

Re: DPR connector

Post by gordon »

I’ll have a look and see if I have any blown DPR chips.
steveaca
Posts: 1532
Joined: Mon Feb 08, 2010 1:12 pm

Re: DPR connector

Post by steveaca »

What I'm looking for is not on the chip itself but on the part that plugs into the chip (or into the blank plate in the case of an analogue car) and which connects to the guide blade on one end and the motor on the other.
Post Reply